WEEK 11

Date:  21  - 25 April 2014

Subject: The process of making a project base for machine moved.

Introduction: Make a project base from cardboard and real grass.

Objectives: 

1. To build the grass cutter base.
2. To test and run the machine on that base.

Project Description: 

1.  First, I have been bought a grass from nursery at Sungai Buloh. This grass need to put on the playwood for this machine moved to cut that grass as in figure 2. I have spend around RM 20.00 for this types of grass.

2.  After that, I have to arrange the cardboard as in figure 1 to act as an obstacle. The distance analog sensor will sense that cardboard and do their work as programmed.

Figure 1: Cardboard and grass have been arranged on that project based

3.  This grass is very thick and wet and it can make this machine difficult to move. So I need to make this grass dry for make this machine moved without any problems obtained.

Figure 2: The grass is arranged to make as a football field

4.  This process have been done in 1 hour duration. It is not difficult to do but it is dirty work because it is involved with real grass. Figure 3 shows the complete project base.

Figure 3: The complete project based

Problem Encountered:

From this task it have a few problems obtained which is the machine cannot moved on this grass. This grass is thick and wet so it have make this machine difficult to moved since it's just used a small wheel. But this problem has solve by make that grass dry.
 
Project Outcome:
  

The project have been successful done. Hence, my project development is on schedule and I should encounter no problems finishing it.